- Under normal conditions of installing wall cladding, the length of WPC wall panels and other wood-plastic profiles should be in accordance with their physical properties and the reasonable data obtained from construction applications. Within this range, WPC wall cladding itself is not easy deformation, bending, bulging crack and so on.
- Unusual operating conditions will affect the project’s quality andthe life span. For special needs, LeadWPC sincerely recommend you’d better discuss with your supplier to find a reasonable plan.
- Due to Wood-Plastic Composite material is a thermoplastic profiles, its expansion coefficient is higher than ordinary solid wood. Therefore, when laying a large area of composite timber cladding onto the wall,you must pre-drillthe hole in the part of fixing screws, the screws must be set into the soft rubber pad, to prevent the wall from deformation and arch camber issues when install such a large area of wall panels.
Precautions:
- Before installing the composite wall cladding you must purchase the wallboard material according to the local environment and geographical conditions, to allow the WPC wall panel can use longer.
- The maximum length of the composite wall panel recommends no more than 3000mm. The maximum length of joist recommends no more than 4000mm.
- When purchasing wood plastic composite wall panel,factories will equip with special accessories, for special requirements, you should buy according to the specification of wall cladding.
- The longitudinal direction of wallboard should reserve 5 ~ 10mm spacing.
- WPC wall panels and other wood-plastic composite materials are similar to real wood, they are able to use ordinary woodworking tools to cutting, sawing, drilling, open tenon etc..
- You should pre-drill holes when using the self -tapping screws to fix the wall panels. Pre- drilling holes diameter should be less than 3/4 screw’s.
Any more questions, welcome to contact us: daisyhelen@lingyicn.com, we will be on your service at any time.
没有评论:
发表评论