Installation Guide of DIY Tiles Series

Warm Tips

This instruction is subject to the criterion of LeadWPC WPC Outdoor Assembled decking product(WPC DIY DECKING TILES). Please read it carefully before installation and follow it strictly.

This manual is provided by the Lingyi New Material (Fujian) Technology Co., LTD. the  right of final explanation is owned by the company.

The contents of this manual can only be used for installation reference, and would in no way replace a license of a professional description. Any construction or usage LeadWPC WPC decoration materials must be consistent with the system of local area or architecture pattern.

LeadWPC cannot be hold accountable for any consequences or risks resulting from any non-observance of the contents of this manual, or take the responsibility of any direct or indirect such situation.

Before installing our LeadWPC WPC outdoor assembled decking product, it is necessary to read the Installation Guide.

Tools Required:

Standard tools: electric saw or handsaw  .

Floor and Accessory :

DIY Floor  :

Specification for this kind of flooring is of 300*300*25mm. It is applicable for balcony, bathroom, garden and the park. It is easy to install, especially for home users. Accordingly  it is named as the DIY floor. It does not need additional keel or connection, of which the thickness is 25 mm. So it is widely used. DIY floor originated as an interior decoration novelty and symbolized high standard of living. With distinctive texture and elegant designs, it specifically caters to people’s pursuit of a higher quality life, while providing you a pleasant construction and spiritual space.

Preparations:

Before installing, please measure the entire surface area. Make sure the ground is solid, smooth, clean and moisture-proof. The recommended deviation should be less than 5mm.

Installation Pattern: (take DIY assembled floors as a example)

Installation Step :

(take DIY assembled floors as a example)

Sealed floor can be installed by End cover (Pictured Above)

Final rendering ( Pictured Above)

Care and Maintenance :(take DIY assembled floors as a example)

1. Clean the floor and remove dirt regularly with a mild detergent or water.
2. Pollution caused by mold, mildew, berries or leaves: use cleaning agents containing sodium hypochlorite and detergent.
3. Rust and dirt: use a cleaning agent containing phosphoric acid.
4. Pollution caused by stroke, the oil or grease: use the detergent containing degreasing agent.
5. Remove profile clearance of debris with tools regularly. It will guarantee smooth drainage and prevent mold growth

http://www.leadwpc.com/installation-guide-diy-tiles-series.html